Utilization Of Agricultural Wastes Research Articles

Iron-doped biochar, an agricultural and environmentally beneficial fertilizer.

The utilization of agricultural waste to create value-added goods has benefited waste management while resolving cost-effectiveness and food shortage problems. Returning biochar produced from agricultural waste to the agricultural field is a sustainable method of enhancing crop production while lowering the environmental effect of typical fertilizers. It also enhances soil condition by modulating pH, soil organic carbon, water retention capacity, and soil ion exchange potential. The current work concentrated on the production of iron oxide-loaded biochar from banana peels. Pyrolysis was carried out at temperatures ranging from 400 to 500°C. The co-precipitation technique was utilized to impregnate Fe3O4 nanoparticles on biochar, and it showed to be an effective and trustworthy method. Loading was done in situ. Characterization techniques such as XRD, FTIR, CHNS, and TGA were employed to characterize synthesized materials. Swelling ratio, water retention, absorbance, and equilibrium water content percentage were used to study the adsorption capabilities of Fe3O4-loaded biochar, soil, and raw biochar. As a consequence, Fe3O4-enriched biochar was shown to have better adsorption capability than raw biochar, which in turn showed better adsorption properties than soil. Iron-loaded biochar was employed as a fertilizer in Abelmoschus esculentus (Okra), and the results showed that it is a cost-effective, environmentally friendly fertilizer.

Understanding China's agricultural non‑carbon-dioxide greenhouse gas emissions: Subnational insights and global trade dynamics

Methane (CH4) and nitrous oxide (N2O) are the second and third most important greenhouse gases after carbon dioxide (CO2), with 60% and 40% of global CH4 and N2O emissions coming from agriculture, respectively. However, the global nexus of non‑carbon-dioxide greenhouse gas (NCGHG) emissions at the subnational scale in China, the world's largest producer and consumer of agricultural products, remains under-examined. To fill this gap, we nested China's provincial input-output data with global data to clarify China's subnational-scale agricultural NCGHG emissions and connected global trade-based relationships. We found that China's production- and consumption-based agricultural NCGHG emissions in 2017 constituted ∼11% and ∼ 13% of the global agricultural NCGHG emissions, respectively, and that there existed a significant spatial mismatch between production- and consumption-based agricultural NCGHG emissions. Domestic consumption drove 94% of China's agricultural NCGHG emissions, which were dominated by China's domestic supply chains related to cattle farming and rice planting. We consequently propose to reduce agricultural NCGHG emissions by improving the efficiency of critical supply chains and agricultural waste utilization.

Activating peroxymonosulfate with Fe-doped biochar for efficient removal of tetracycline: Dual action of reactive oxygen species and electron transfer

If pharmaceutical wastewater is not managed effectively, the presence of residual antibiotics will result in significant environmental contamination. In addition, inadequate utilization of agricultural waste represents a squandering of resources. The objective of this research was to assess the efficacy of iron-doped biochar (Fe-BC) derived from peanut shells in degrading high concentrations of Tetracycline (TC) wastewater through activated peroxymonosulfate. Fe-BC demonstrated significant efficacy, achieving a removal efficiency of 87.5% for TC within 60 min without the need to adjust the initial pH (20 mg/L TC, 2 mM PMS, 0.5 g/L catalyst). The degradation mechanism of TC in this system involved a dual action, namely Reactive Oxygen Species (ROS) and electron transfer. The primary active sites were the Fe species, which facilitated the generation of SO4•-, •OH, O2•-, and 1O2. The presence of Fe species and the C=C structure in the Fe-BC catalyst support the electron transfer. Degradation pathways were elucidated through the identification of intermediate products and calculation of the Fukui index. The Toxicity Estimator Software Tool (T.E.S.T.) suggested that the intermediates exhibited lower levels of toxicity. Furthermore, the system exhibited exceptional capabilities in real water and circulation experiments, offering significant economic advantages. This investigation provides an efficient strategy for resource recycling and the treatment of high-concentration antibiotic wastewater.

Promoting Straw Recycling to Accelerate the Sustainable Development of Agriculture

Guided by Xi Jinping’s thought of socialism of the new era with Chinese characteristics in the 14th Five-Year Plan, the comprehensive utilization of straw is closely integrated with the annual key tasks of improving rural areas, by adhering to the priority of agricultural use, industry-oriented, multi-measures, and focusing on counties and municipalities with larger amounts of straw resources. Agricultural modernization requires that provincial policies focus on promoting the utilization of straw as fertilizer, feed, energy production, substrate, raw material, and so on while emphasizing the establishment of a complete straw collection, storage, and transportation system. In response to the problem of the open burning of straw in recent years, China has adopted a variety of policies and measures to control pollution and rationally utilize straw resources. The state and provinces have issued many policy documents on straw resource management, which are divided into the management of straw burning, comprehensive utilization of straw, planning of the straw energy industry, and financial subsidies. Rational utilization of straw not only solves the key issues of employment of farmers but also promotes ecological efficiency and rural economic development. The research results of straw recycling have also made important progress in improving the utilization rate and value of straw, promoting the resource utilization of agricultural waste, and providing important technical support for the sustainable development of China’s agriculture and rural environmental protection.

Utilization of Agricultural Waste for the Cultivation of Pleurotus Mushrooms in Thailand

Thailand is one of the major agricultural production countries in the world. Therefore, large amounts of agricultural waste are generated as by-products of the agroindustry. The wastes are usually discarded or burnt, resulting in environmental pollution. The main goal of this research was to evaluate the use of agricultural waste for mushroom cultivation. A total of 15 mushroom isolates were recovered from mother spawns and basidiocarps. They were screened for their cellulolytic enzyme activity on Czapek agar using carboxymethyl cellulose (CMC) as the sole carbon source. Two isolates of the oyster mushrooms, Pleurotus pulmonarius PP6 and Pleurotus ostreatus PO3, produced the best enzyme activities. To observe the mycelial growth on agricultural waste, the two oyster mushroom candidates were cultured in jars containing five different types of agricultural waste: corn husk, rice straw, coconut meal, coconut husk and sugarcane bagasse, and the jars were incubated at 25°C for six weeks. The results show that both isolates grew best on coconut meal, producing very densely packed mycelia. Meanwhile, corn husk and rice straw were also good sources for oyster mushroom cultivation. This study shows that these three substrates have the potential to be utilized in mushroom cultivation on a commercial scale.

Preparation of Wheat Straw Hot-Pressed Board through Coupled Dilute Acid Pretreatment and Surface Modification.

The production of wheat straw waste board materials encounters challenges, including inadequate inherent adhesiveness and the utilization of environmentally harmful adhesives. Employing a hot-pressed method for converting wheat straw into board materials represents a positive stride towards the resourceful utilization of agricultural wastes. This study primarily focuses on examining the influence of hot-pressing process conditions on the mechanical properties of wheat straw board materials pretreated with dilute acid. Additionally, it assesses the necessity of dilute acid treatment and optimizes the hot-pressing conditions to achieve optimal results at 15 MPa, 2 h, and 160 °C. Furthermore, a comprehensive process is developed for preparing wheat straw hot-pressed board materials by combining dilute acid pretreatment with surface modification treatments, such as glutaraldehyde, citric acid, and rosin. Finally, a thorough characterization of the mechanical properties of the prepared board materials is conducted. The results indicate a substantial improvement in tensile strength across all modified wheat straw board materials compared to untreated ones. Notably, boards treated with glutaraldehyde exhibited the most significant enhancement, achieving a tensile strength of 463 kPa, bending strength of 833 kPa, and a water absorption rate of 14.14%. This study demonstrates that combining dilute acid pretreatment with surface modification treatments effectively enhances the performance of wheat straw board materials, offering a sustainable alternative to traditional wood-based board materials.

Ultrasonic-Assisted Extraction of Dictyophora rubrovolvata Volva Proteins: Process Optimization, Structural Characterization, Intermolecular Forces, and Functional Properties.

Dictyophora rubrovolvata volva, an agricultural by-product, is often directly discarded resulting in environmental pollution and waste of the proteins' resources. In this study, D. rubrovolvata volva proteins (DRVPs) were recovered using the ultrasound-assisted extraction (UAE) method. Based on one-way tests, orthogonal tests were conducted to identify the effects of the material-liquid ratio, pH, extraction time, and ultrasonic power on the extraction rate of DRVPs. Moreover, the impact of UAE on the physicochemical properties, structure characteristics, intermolecular forces, and functional attributes of DRVPs were also examined. The maximum protein extraction rate was achieved at 43.34% under the best extraction conditions of UAE (1:20 g/mL, pH 11, 25 min, and 550 W). UAE significantly altered proteins' morphology and molecular size compared to the conventional alkaline method. Furthermore, while UAE did not affect the primary structure, it dramatically changed the secondary and tertiary structure of DRVPs. Approximately 13.42% of the compact secondary structures (α-helices and β-sheets) underwent a transition to looser structures (β-turns and random coils), resulting in the exposure of hydrophobic groups previously concealed within the molecule's core. In addition, the driving forces maintaining and stabilizing the sonicated protein aggregates mainly involved hydrophobic forces, disulfide bonding, and hydrogen bonding interactions. Under specific pH and temperature conditions, the water holding capacity, oil holding capacity, foaming capacity and stability, emulsion activity, and stability of UAE increased significantly from 2.01 g/g to 2.52 g/g, 3.90 g/g to 5.53 g/g, 92.56% to 111.90%, 58.97% to 89.36%, 13.85% to 15.37%, and 100.22% to 136.53%, respectively, compared to conventional alkali extraction. The findings contributed to a new approach for the high-value utilization of agricultural waste from D. rubrovolvata.

A wastes-based hierarchically structured cellulose membrane: Adsorption performance and adsorption mechanism

It was imperative to expeditiously investigate novel avenues for the valorization of agricultural waste biomass crop straws. The straws represented promising substrates to design eco-friendly adsorbents for the effective treatment of complex dyeing wastewater owing to their widespread availability, low cost, easy production, and environmental friendliness. Despite the advantages, developing adsorbents with versatile uses, antibacterial properties, and strong mechanical qualities remained a challenge. Herein, a sustainable waste treatment strategy is put forward by developing multifunctional adsorbents derived from agricultural waste. The adsorbents are designed to synchronously adsorb the typical contaminants such as organic molecule (methylene blue, MB) and heavy metal ions (cadmium ion, Cd2+) in dyeing wastewater. Through the assembly of cellulose fibers, multiscale cellulose membrane (MCM) substrates with enhanced two-dimensional (2D) structure were simply fabricated from biomass crop straws. Coating functional copper phosphate (CP) nanoflakes on the MCM substrate effectively constructed the hierarchical structure to achieve the synchronous adsorption. The synergistic effects of electrostatic attraction, hydrogen bonding and coordination greatly prompted the adsorption process. Furthermore, the multifunctional adsorbents were imparted with satisfactory antibacterial properties, thereby expected to solve the problem of membrane fouling in wastewater. Hierarchically structured copper phosphate @ cellulose antibacterial adsorbents (CP@MCM) exhibit huge application potential in the resource utilization of agricultural waste and effective treatments for dyeing wastewater.

Birnessite-Type MnO2 Modified Sustainable Biomass Fiber toward Adsorption Removal Heavy Metal Ion from Actual River Aquatic Environment.

In this work, a novel birnessite-type MnO2 modified corn husk sustainable biomass fiber (MnO2@CHF) adsorbent was fabricated for efficient cadmium (Cd) removal from aquatic environments. MnO2@CHF was designed from KMnO4 hydrothermally treated with corn husk fibers. Various characterization revealed that MnO2@CHF possessed the hierarchical structure nanosheets, large specific surface area, and multiple oxygen-containing functional groups. Batch adsorption experimental results indicated that the highest Cd (II) removal rate could be obtained at the optimal conditions of adsorbent amount of 0.200 g/L, adsorption time of 600 min, pH 6.00, and temperature of 40.0 °C. Adsorption isotherm and kinetics results showed that Cd (II) adsorption behavior on MnO2@CHF was a monolayer adsorption process and dominated by chemisorption and intraparticle diffusion. The optimum adsorption capacity (Langmuir model) of Cd (II) on MnO2@CHF was 23.0 mg/g, which was higher than those of other reported common biomass adsorbent materials. Further investigation indicated that the adsorption of Cd (II) on MnO2@CHF involved mainly ion exchange, surface complexation, redox reaction, and electrostatic attraction. Moreover, the maximum Cd (II) removal rate on MnO2@CHF from natural river samples (Xicheng Canal) could reach 59.2% during the first cycle test. This study showed that MnO2@CHF was an ideal candidate in Cd (II) practical application treatment, providing references for resource utilization of agricultural wastes for heavy metal removal.

Preparation and characterization of handsheet using cellulose based Agri-weed: A sustainable utilization of Urena Lobata fiber

The increasing depletion of reserves of natural resources has led to a growing worldwide focus on the exploitation of available waste in new domains. The presence of weedy plants is pervasive on a global scale and has detrimental effects on several aspects of the environment, agriculture, and people's health. Therefore, repurposing these Agri-weed plants for beneficial purposes would be a significant achievement. Furthermore, since raw materials constitute a substantial portion of manufacturing costs, using weeds as a feasible substitute for raw materials might potentially provide considerable advantages for manufacturers. In this study, an endeavor has been made to the utilization of agricultural waste “Urena Lobata”, for the purpose of paper production. In the interim, the utilization of Urena Lobata as an alternative and sustainable raw material for pulp and paper industry could potentially offer a beneficial approach to mitigation of deforestation. The effective production of handsheets with weights of 70 g/m2 and 80 g/m2 was achieved using Urena Lobata fiber, Bleached Urena Lobata Fiber, and hardwood kraft pulp. Mechanical characteristics of handsheet's were comprehensively examined by the bursting index, tensile strength, tear index, brightness percentage and scanning electron microscope for handsheet's morphology. The results show that the handsheets produced by Urena Lobata fiber exhibit a much lower brightness percentage, high tensile strength and bursting index. Alongside, handsheets by bleached Urena Lobata fiber indicate higher brightness percentage, satisfactory values for tensile strength, bursting index, and tear index. The prepared materials are suitable for a broad spectrum of prospective applications, encompassing newsprint, tissue paper, filtration paper as well as high-quality writing and printing paper.

Review on Bio- Bricks

This paper reviews the utilization of Agricultural waste for making Bio Bricks and other construction materials to reduce burning and disposal problems of Agricultural waste due to increasing Air Pollution and make economic and environment efficient construction material. Agricultural waste burning is a significant source of pollution in India, especially after the harvesting season. Bio-bricks was developed as an alternative and sustainable building material that is made up of agricultural waste. And at the same time will also lead to the reduction of air pollution and create new jobs at the grassroots level. The use of Agricultural waste in construction materials is one of new way to deal with disposal and burning of Agricultural waste. India is home to some of the most polluted cities of the world in terms of its air quality. Data shows that around 20 out of the 30 most polluted cities of the world are in India. So the study provides green building material through Agricultural waste for sustainable development of Bio Bricks. Some additional work in this project can be done which will help environment with decreasing Air pollution by reducing of Agricultural waste. Bio-bricks can be developed as a carbon- negative, sustainable and economically viable material for construction. With the right kind of product development and incentives, it can diversify into numerous products satisfying the needs of an ecologically sensitive future

Revalorization of cellulosic fiber extracted from the waste stem of Brassica oleracea var. botrytis L. (cauliflower) by characterizing for potential composite applications

This study investigates a protocol for extracting and characterizing fibers obtained from cauliflower (Brassica oleracea var. botrytis L.) stem agricultural waste, exploring its suitability for composite applications. Brassica oleracea var. botrytis L. (BOVBL), commonly known as cauliflower, was comprehensively characterized for the first time, with its fiber extracted from plant waste stems. BOVBL fiber, subjected to microbial degradation, exhibited properties typical of natural fibers, with a density of 1.47 g/cm3 and a composition of 50.09 % cellulose, 19.7 % hemicellulose, and 22.3 % lignin. XPS analysis showed that the surface structure of the fiber consisted of carbon (64.37 %) and oxygen (22.36 %) due to cellulose. The crystalline index is calculated as 57.32 % indicating a highly organized molecular arrangement. SEM images depicted a rough surface with hexagonal and rectangular forms, enhancing resin penetration for improved composite adhesion. The thermal analysis demonstrated stability up to 324.38 °C, promising suitability for composite heat processing. The results of the single fiber test (tensile strength, E-modulus, and elongation at break) were assessed by using Weibull distribution analysis. This investigation provides suggestions for the potential applications of organic waste leftovers as a new, environmentally friendly material for fiber-reinforced polymer composites aligning with circular economy and sustainability through the utilization of agricultural waste in the future.

Eco-Friendly Coffee Waste-Based Carbon Dots Coupled to ZnBi-Layered Double Hydroxide Heterojunction: Enhanced Control of Interfacial Charge Transfer for Highly Efficient Visible-Light Catalytic Activity

Using a simple, low cost, and excellent efficient approach, carbon dots (CDs) were fabricated via a one-pot hydrothermal process of coffee waste. Amazingly, the combination of 2% CDs with ZnBi2O4 to form a new and excellent heterogeneous photocatalyst enabled the complete decomposition of 2, 4-dichlorophenoxyacetic acid (2, 4-D) into CO2 and H2O. The findings of this study provide a new perspective on the utilization of agricultural waste for creating products of scientific and practical significance. More than 91% of 2, 4-D (initial concentration of 30 mg/L) was completely decomposed and dechlorinated using 1.0 g/L of CDs (2%)-ZnBi2O4 at pH 4.0 after 120 min of exposure to visible light (with k = 0.0178 min−1), and more than 86% of the decomposed 2, 4-D was mineralized into CO2 and H2O. There was no sign of catalyst deactivation after four cycles of reuse, demonstrating the durability and efficiency of CDs (2%)-ZnBi2O4. The significant improvement in the photocatalytic efficiency of CDs (2%)-ZnBi2O4 compared with that of bare CDs or ZnBi2O4 is due to the formation of defects at the interfaces of the heterojunction; therefore, the movement of photogenerated electrons at the interface between the two components is rapid. The mineralization of 2, 4-D by CDs (2%)-ZnBi2O4 upon exposure to visible light is induced mainly by the photogenerated holes, followed by O2•−, and finally OH• radicals.

Investigating fungal community characteristics in co-composted cotton stalk and various livestock manure products.

Agricultural wastes, comprising cotton straw and livestock manure, can be effectively managed through aerobic co-composting. Nevertheless, the quality and microbial characteristics of co-composting products from different sources remain unclear. Therefore, this study utilized livestock manure from various sources in Xinjiang, China, including herbivorous sheep manure (G), omnivorous pigeon manure (Y), and pigeon-sheep mixture (GY) alongside cotton stalks, for a 40-day co-composting process. We monitored physicochemical changes, assessed compost characteristics, and investigated fungal community. The results indicate that all three composts met established composting criteria, with compost G exhibiting the fastest microbial growth and achieving the highest quality. Ascomycota emerged as the predominant taxon in three compost products. Remarkably, at the genus level, the biomarker species for G, Y, and GY are Petromyces and Cordyceps, Neurospora, and Neosartorya, respectively. Microorganisms play a pivotal role in organic matter degradation, impacting nutrient composition, demonstrating significant potential for the decomposition and transformation of compost components. Redundancy analysis indicates that potassium, total organic carbon, and C:N are key factors influencing fungal communities. This study elucidates organic matter degradation in co-composting straw and livestock manure diverse sources, optimizing treatment for efficient agricultural waste utilization and sustainable practices.

Avocado Pruning Residues for the Formulation of Bio‐Based Polyethylene/Fiber‐Based Biocomposites for Sustainable Food Packaging

AbstractThe extensive use of non‐biodegradable bioplastics and fossil‐based plastics in food packaging presents a significant environmental challenge. Consequently, there has been a growing interest in exploring agricultural biomass as a potential source for formulating biocomposites for packaging due to the substantial amount of lignocellulosic residue generated. This study explores the utilization of avocado pruning residue (APR) for isolating lignocellulose fibers and their application as replacement and reinforcement material for bio‐based polyethylene (BioPE) composites. The results obtained reveal that a concentration of 9% (w/w) of maleic anhydride‐grafted‐polyethylene (MAPE) shows the most effective fiber–polymer interaction, resulting in a significant improvement of 25.47% in the mechanical properties. Biocomposites with varying fiber concentrations, ranging from 10% to 40% (w/w), are prepared and assessed for their macro‐ and micromechanical properties. The results demonstrate a substantial 49% increase in tensile strength and a remarkable 325% enhancement in Young's modulus for biocomposites containing 40% (w/w) fiber content. Furthermore, micromechanical analysis provides insights into the intrinsic strength and modulus of avocado fibers, with values of ≈437 MPa and 33 GPa, respectively. This research contributes to the development of sustainable and eco‐friendly alternatives for food packaging, reducing the reliance on fossil‐based plastics, and promoting the utilization of agricultural waste.

Recent Advances in the Application of Agricultural Waste in Construction

On a global scale, millions of tons of diverse agricultural residues are generated annually. Most of these wastes are burned or dumped in landfills, which causes environmental pollution. Addressing environmental issues arising from agricultural waste materials, in addition to mitigating heating and cooling expenses in the construction sector, is an interesting challenge for researchers. The utilization of agricultural wastes in different parts of construction is producing positive findings day by day, and investigating research in this field is a curiosity for researchers. This short study reviewed the most recent achievements in using agricultural wastes as a substitute or additive material for construction. Using these wastes as aggregate, ash (as a supplementary for cement), or fibers for foam concrete, insulation materials, etc. has been reviewed. This review has focused on very recent published papers. Several studies have demonstrated the effective influences of agro-waste materials in construction, like retaining the compressive strength (155 MPa) of concrete at standard levels and reducing heat losses in buildings (69% energy savings for brick insulated using wheat straw), as well as sound insulation. The use of agro-waste materials for insulation positively improved thermal conductivity, costs, and energy savings. However, some wastes did not provide a high added value, which shows that more investigations still need be performed to fill this gap in the research. Considering the global scale of agricultural waste generation and the potential benefits to both the environment and construction industry, continued research in this area is essential.

Catalytic pyrolysis of rape straw to produce light aromatic hydrocarbons over HZSM-5 loaded by metal ions from spent lithium batteries extracted with citric acid

In this study, metal-loaded HZSM-5 was prepared with metal ion extracted from the cathode materials of spent lithium batteries (lithium iron phosphate, LFP; lithium nickel-cobalt manganate, NCM) with citric acid for the improved production of light aromatic hydrocarbons by catalytic pyrolysis of rape straw. Because of the dealuminization effect of citric acid on HZSM-5, mesopores were introduced, and the diffusion and conversion of pyrolysis gas over acid sites were improved. After metal loading with acid-leaching solution, the amount of weak and total acids in metal-loaded HZSM-5 increased a lot, which was conducive to the dehydration, deoxygenation, decarbonylation and aromatization of pyrolysis, and the production of monocyclic aromatic hydrocarbons (MAHs). With 0.1 mol/L citric acid for LFP and NCM treatment, the metal-loaded catalyst showed a higher yield of benzene, toluene and xylene (BTX) of 11.10 wt.% during catalytic pyrolysis of rape straw. Compared with 0.1-NCM-H5, a higher yield of MAHs was obtained over 0.1-LFP-H5 with a more favorable pore structure and higher amounts of weak and total acid sites. In general, the high-valued utilization of agricultural wastes and spent lithium batteries was realized in this study to produce clean energy.

Solvent-free preparation of high synthetic yield carbon dots from sodium ligninsulfonate for on-site detection of formaldehyde in the environment

Formaldehyde (FA), as a widespread toxic pollutant in cars, furniture and construction materials, has been implicated in hazardous health effects on the human body. This paper presents a green and large-scale preparation of carbon dots (CDs) using sodium ligninsulfonate and o-phenylenediamine through a solvent-free reaction method. The prepared CDs exhibit a synthetic yield of 43 % and show green fluorescence. In addition, the CDs can be employed as an ideal fluorescent FA probe, exhibiting excellent linearity within the range of 0–50 μM (R2 = 0.998, limit of detection (LOD) = 79 nM). By taking advantage of the obvious color changes in detection, the droplet detection system is investigated for on-site visual detection of indoor FA gas. This work not only contributes to the efficient utilization of agricultural waste but also represents a significant process in the development of FA on-site detection.

Biosynthesis of high antibacterial silver chloride nanoparticles against Ralstonia solanacearum using spent mushroom substrate extract

Abstract In this study, a green and highly efficient method was proposed to synthesize nano-silver chloride (nano-AgCl) by using spent mushroom substrate (SMS) extract as a cheap reactant. Nanoparticles were characterized by a series of techniques like X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), which showed the formation of near-spherical silver chloride nanoparticles with an average size of about 8.30 nm. Notably, the synthesized nano-silver chloride has a more prominent antibacterial effect against Ralstonia solanacearum (EC50=5.18 mg/L) than non-nano-sized silver chloride particles, nano-silver chloride synthesized by chemical method, and commercial pesticides. In-depth, the study of mechanism revealed that nano-silver chloride could cause cell membrane disruption, DNA damage and intracellular generation of reactive oxygen species (•OH, •O2- and 1O2) leading to peroxidation damage in Ralstonia solanacearum (R. solanacearum). And the reaction between nano-silver chloride and bacteria could be driven by intermolecular forces instead of electrostatic interactions. Our study provides a new approach to synthesizing nano-silver chloride as a highly efficient antibacterial agent and broadens the utilization of agricultural waste spent mushroom substrate.

Sustainable poultry farming in developing nations: Exploring cassava waste utilization for enhanced poultry production and economic viability

AbstractIn intensive poultry production, particularly in developing countries like Nigeria, addressing the issues of agricultural waste and feed costs for farmers is crucial. This study explores a solution by incorporating cassava waste into broiler chicken diets. The research examines its effects on economic factors, growth performance, carcass yield, and agricultural waste utilization over 8 weeks. Three hundred broiler chickens were divided into three groups: a control group without cassava waste and two treatment groups with 10% and 15% cassava waste inclusion. Results showed that a 10% inclusion improved key performance indicators such as weight gain, feed intake, feed conversion ratio, and carcass weight, while a 15% inclusion was less efficient than the control. Economically, diets with 10% and 15% cassava tuber waste were more cost‐effective than the control, emphasizing the economic benefits of cassava‐based diets for broiler chickens, and offering a sustainable, cost‐efficient feeding option for poultry farmers.